FARLIG AVFALL / HAZARDOUS WASTE / ODPADY NIEBEZPIECZNE
Vinduer
Mange vinduer er farlig avfall. Vinduer med miljøfarlige stoffer over grenseverdiene for farlig avfall må sorteres ut og leveres til godkjent mottak for farlig avfall.
Miljøfarlige stoffer
- PCB (norske vinduer 1965 – 1975, utenlandske vinduer til og med 1979).
- Klorparafiner (norske vinduer 1976 – 1990, utenlandske vinduer 1980 -1990).
Håndtering
- Glasset må ikke knuses.
- Bevisst nedknusing av glass i vinduer før eller under transport er ulovlig, med mindre det foreligger en særskilt tillatelse fra Miljødirektoratet.
- Sette på pall.
- Levere som farlig avfall.
Andre miljøfarlige stoffer
- Asbest i «kitt» i gamle vinduer. Særlig vanlig i vinduer med isolerglassrute merket «Thermopane».
- HKFK-gass i isolasjonsmaterialet polyuretan i fastfel- tet i terrassedører og veggfelt.
- PCB/klorparafiner i fugemasse mellom vindu og vegg.
Avfallsklassifisering og faremerking
Avfallstype |
Avf. stoffnr. |
Forslag til EAL-kode |
|---|---|---|
PCB |
7211 |
*170902 |
Klorparafiner |
7158 |
*170903 |
Ingen faremerking
Det kan være fugemasse mellom vinduskarmen og selve veggen. Slik fugemasse inneholder ofte miljøfarlige stoffer som PCB eller klorparafiner og må derfor leveres som farlig avfall.
Les mer om avfallstypen her:
- Avfallshåndtering av byggeplass (pdf, ekstern lenke)
- Ruteretur (nettside)
Tips
Vinduets produksjonsår står ofte stemplet på den blanke metallisten mellom glassene.
Windows
Many windows are considered hazardous waste. Windows that contain environmentally harmful substances above a limit value set for hazardous waste should be sorted and delivered as hazardous waste to a waste reception.
Substances harmful to the environment
- PCB (Norwegian windows 1965-1975, foreign widows up to and including 1979).
- Chlorinated paraffins (Norwegian windows 1976-1990, foreign widows 1980-1990.
Handling the waste
- The glass should not be broken or shattered.
- Purposely breaking the glass in the window before or during transportation is illegal, unless there exists a specific permission from the Norwegian Environmental Agency (Miljødirektoratet)
- Everything needs to be put on a pallet.
- Should be delivered as hazardous waste.
Other environmentally harmful substances
- Asbestos in old windows putty. Particularly common in windows with an insulating glass pane marked with “Thermopane”.
- HCFC gas in the insulation material polyurethane, found in the fixed panel in patio doors and wall panels.
- PCB and chlorinated paraffins in sealant between window and wall.
Classification and labeling of the waste
Classification of the waste |
Waste code |
Suggested EAL-code |
|---|---|---|
PCB |
7211 |
*170902 |
Chlorinated paraffins |
7158 |
*170903 |
No danger labeling
There could be sealant between the window and the wall. This kind of sealant often contains substances that are harmful to the environment, such as PCB or chlorinated par- affins, and must therefore be delivered as hazardous waste.
Read more about the type of waste here:
- Avfallshåndtering av byggeplass (pdf, ekstern lenke)
- Ruteretur (nettside)
Tips
The production year of the window is usually stamped on the blank metal seal in between the glasses.
Okna
Prawie wszystkie okna są odpadami niebezpiecznymi. Okna za- wierające substancje niebezpieczne dla środowiska w ilości prze- kraczającej wartości dopuszczalne dla odpadów niebezpiecznych muszą zostać posegregowane i dostarczone do zatwierdzonego punktu odbioru odpadów niebezpiecznych.
Substancje niebezpieczne dla środowiska:
- PCB (okna norweskie 1965 – 1975, okna zagraniczne do 1979 r.) (www.ruteretur.no).
- Chlorowane parafiny (okna norweskie 1976 – 1989, okna zagra- niczne 1980 -1989).
- Ftalany (1990 – ok. 2005).
Postępowanie:
- NIE TŁUC SZKŁA.
- Umyślne rozbijanie szkła w oknach przed lub w trakcie transportu jest nielegalne, chyba że istnieje specjalne zezwolenie Norweskiej Agencji Ochrony Środowiska.
- Umieścić na palecie.
- Dostarczyć jako odpad niebezpieczny.
Inne substancje niebezpieczne dla środowiska:
- Azbest w „kitach” używanych w starych oknach.
- Gaz HCFC (freon) w materiale izolacyjnym – poliuretanie w panelu stałym drzwi tarasowych i w panelach ściennych.
- PCB / parafiny chlorowane w masach uszczelniających między oknem a ścianą.
Klasyfikacja odpadów i oznakowanie zagrożeń, okna
Typ odpadu |
Nr odpadu |
Proponowany kod EAL |
|---|---|---|
PCB |
7211 |
*170902 |
Chlorowane parafiny |
7158 |
*170903 |
Ftalany |
7156 |
*170903 |
Brak Oznakowania
Między ramą okna a samą ścianą może znajdować się masa uszczelniająca. Masy uszczelniające często zawierają substancje niebezpieczne dla środowiska, takie jak PCB lub chlorowane para- finy i dlatego muszą być dostarczane jako odpady niebezpieczne.
Dowiedz się więcej o rodzajach odpadów tutaj:
Porady
Rok produkcji okna najczęściej można znaleźć na błyszczącej taśmie metalowej pomiędzy szybami.



